Contents
Raw Mill Separator maintenance checklist
O-seap Separator
1- 2 webs inside the separator and the outlet duct have worn out.
2- The air seal have a sever wear and there is part not exist.
3- All separator fixed louvers have a sever wear.
4- The fixation bolts between the flange which carrying the drive unit and separator roof have a sever wear.
5- The rubber element of the drive unit coupling is damaged
![cement raw mill O-seap seperator](https://sp-ao.shortpixel.ai/client/to_auto,q_lossless,ret_img,w_619,h_548/https://www.cementequipment.org/wp-content/uploads/2016/08/cement-raw-mill-O-seap-seperator.jpg)
Recommendation:
1- Patch the worn out sheet metal for the outlet separator duct and webs
2- Replace the air seal completely due to a sever wear.
3- Replace all guide vanes for the separator due to sever wear
4- Replace the bolts which fix the drive unit flange with separator roof due to sever wear.
5- Replace the coupling element and erect the missed elements.
6- The guide bearing of separator must be changed due to damage and it is preferable to change the thrust bearing
Action has been taken
1- The worn out parts in the outlet duct and in rotor supporting webs have been patched.
2- The coupling elements and bolts that fix the drive unit flange with separator roof have been replaced
3- Both bearing have been changed
if you have any inquiry please contact me : project20062015@gmail.com